Products > Cryocrystallography > CryoLoops > Mounted CryoLoop™ – 10 micron
Mounted CryoLoop™ – 10 micron
Applications
- Cryocrystallography
Features
- Synthetic CryoLoop on stainless steel MicroTube
- MicroTube specially engineered with EasySnap notches
Description
Mounted CryoLoops with 10 micron diameter nylon. The 10 micron Mounted CryoLoop shows less background diffraction than the 20 micron Mounted CryoLoop. Please note that the 10 micron Mounted CryoLoops are very flexible due to their small diameter. These nylon loops are bonded to hollow, stainless steel MicroTubes™ that are used to mount, freeze, and secure the crystal during cryocrystallographic procedures and X-ray data collection. The MicroTube is 24 mm in length and is specially engineered with EasySnap™ notches at the 10, 12, 14, 18, and 21 mm measures. To obtain the desired length of MicroTube, simply snap the MicroTube at the desired length and secure to the CrystalCap using epoxy or similar adhesive. These nylon loops show minimal diffraction, are thin for fast freezing, strong, and aerodynamic.
Most data collection geometries prefer or require a 22 mm length between the base of the cap and the beam. For a 22 mm overall length using the CrystalCap, CrystalCap ALS, CrystalCap ALS HT and CrystalCap SPINE HT, snap the MicroTube at the second notch from the bottom, creating an 18 mm MicroTube lenghth and secure to the CrystalCap using epoxy or similar adhesive. For a 22 mm over length using the CrystalCap Copper, CrystalCap Copper HT, CrystalCap ALS Copper HT snap the MicroTube at the fifth notch from the bottom (notch closest to the CryoLoop) and secure to the CrystalCap using epoxy or similar adhesive.
应用
低温晶体学
特征
不锈钢微管上的合成 CryoLoop
MicroTube 特别设计有 EasySnap 槽口
描述
装有 10 微米直径尼龙的 CryoLoops。 10 微米安装的 CryoLoop 显示出比 20 微米安装的 CryoLoop 更少的背景衍射。请注意，10 微米安装的 CryoLoop 直径很小，因此非常灵活。这些尼龙环连接到空心不锈钢 MicroTubes™ 上，用于在冷冻结晶程序和 X 射线数据收集过程中安装、冷冻和固定晶体。 MicroTube 长 24 毫米，特别设计有 10、12、14、18 和 21 毫米尺寸的 EasySnap™ 槽口。要获得所需长度的 MicroTube，只需将 MicroTube 卡入所需长度并使用环氧树脂或类似粘合剂固定到 CrystalCap。这些尼龙环显示出最小的衍射，很薄，可以快速冷冻，坚固且符合空气动力学。
大多数数据收集几何结构更喜欢或需要帽底部和梁之间的长度为 22 毫米。对于使用 CrystalCap、CrystalCap ALS、CrystalCap ALS HT 和 CrystalCap SPINE HT 的 22 毫米总长度，从底部起第二个槽口处扣住微管，创建 18 毫米的微管长度并使用环氧树脂或类似粘合剂固定到 CrystalCap。对于使用 CrystalCap Copper、CrystalCap Copper HT、CrystalCap ALS Copper HT 超过 22 毫米的长度，请在距底部第五个凹槽（最靠近 CryoLoop 的凹槽）处扣住 MicroTube，并使用环氧树脂或类似粘合剂将其固定到 CrystalCap。
HR4-994 Mounted CryoLoop 0.025 – 0.05 mm
CAT NO
HR4-994
NAME
DESCRIPTION
0.025-0.05 mm – 25 pack
PRICE
$86.00
cart quote
CAT NO
HR4-995
NAME
DESCRIPTION
0.05 – 0.1 mm – 25 pack
PRICE
$86.00
cart quote
CAT NO
HR4-997
NAME
DESCRIPTION
0.1 – 0.2 mm – 25 pack
PRICE
$86.00
cart quote
CAT NO
HR4-999
NAME
DESCRIPTION
0.2 – 0.3 mm – 25 pack
PRICE
$86.00
cart quote
References
1. A novel approach to micro-sample X-ray powder diffraction using nylon loops. Reibenspies and Bhuvanesh. J. Appl. Cryst. (2003). 36, 1480-1481.