VDX Plate without sealant-Hampton不带密封胶的 VDX24孔板

Products > Crystallization Plates, Hardware & Accessories > 24 Well Crystallization Plates > VDX Plate without sealant

VDX Plate without sealant

Applications

Hanging drop crystallization
Sitting drop crystallization with Micro-Bridges®
Dialysis crystallization with Dialysis Buttons™

Features

24 well plate with raised cover
Compatible with 22 mm diameter square and circle cover slides
Optically clear plastic
Extremely versatile and cost-effective crystallization platform
Compatible with UV crystal imaging when used with HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides and HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

Description

24 well crystallization plate for hanging drop or sitting drop vapor diffusion crystallization (when used with Micro-Bridges or Glass Rods), or dialysis crystallization (when used with Dialysis Buttons). Stackable, optically clear plastic 24 well plates with raised covers (to allow room for cover slides) and flat bottoms for exceptional optics. Raised, wide rings around each reservoir (well) minimize cross contamination and allow each well to be individually sealed with 22 mm diameter circle or square cover slides. Plates are individually wrapped and supplied without sealant.

15.0 cm x 10.8 cm plate footprint is convenient for manual pipetting and well access while at the same time compatible with some automated liquid handling systems.
Approximate dimensions: 15.0 cm x 10.6 cm x 2.2 cm.
Approximate well size: 1.7 cm x 1.6 cm.
Typical well volume: 500 to 1,000 µl.
Well capacity: 3.5 ml.

不带密封胶的 VDX 板
应用
悬滴结晶
使用 Micro-Bridges® 进行静滴结晶
使用 Dialysis Buttons™ 进行透析结晶
特征
24孔板带凸起盖板
兼容直径为 22 毫米的方形和圆形盖玻片
光学透明塑料
极其通用且具有成本效益的结晶平台
与 HR3-231 和 HR3-233 – 22 mm x 0.22 mm 硅化圆形盖玻片和 HR3-215 和 HR3-217 – 22 mm x 0.22 mm 硅化方形盖玻片一起使用时，与 UV 晶体成像兼容
描述
24 孔结晶板，用于悬滴或坐滴蒸气扩散结晶（与微桥或玻璃棒一起使用时）或透析结晶（与透析按钮一起使用时）。可堆叠、光学透明的塑料 24 孔板，带有凸起的盖板（为盖玻片留出空间）和平底用于特殊光学元件。每个水库（孔）周围凸起的宽环可最大限度地减少交叉污染，并允许每个孔用直径为 22 毫米的圆形或方形盖玻片单独密封。板材单独包装，不带密封胶供应。

15.0 cm x 10.8 cm 的板占用空间便于手动移液和进样孔，同时与一些自动液体处理系统兼容。
大概尺寸：15.0 厘米 x 10.6 厘米 x 2.2 厘米。
大约孔尺寸：1.7 cm x 1.6 cm。
典型孔体积：500 至 1,000 µl。
孔容量：3.5 毫升。

HR3-141 VDX Plate without sealant